Home / Collections / Accessories / Promote Control Shutter Cable CN3

Promote Control Shutter Cable CN3

$18.95
Promote Control Shutter Cable CN3

Promote Control Shutter Cable CN3

$18.95

This cable requires a separately available Promote Control HDR bracketing controller unit.

Using a separate shutter cable with Promote Control offers the following benefits:

  • Enables Bulb Ramping / Bulb HDR modes
  • Provides Mirror Lock-Up functionality
  • Allows automated exposures longer than 30 seconds
  • Ensures faster camera reaction to shutter release, especially in "High Dynamic Range" mode
  • Activates "Manual Hold" mode
  • Enables arbitrary shutter speeds in "One Shot" and "Time Lapse" modes
  • Allows pre-focusing the camera using the Promote Control "Focus" button
  • Enables basic Promote Control shutter release functionality even when out of battery power

    This shutter cable is compatible with the following cameras:

    Canon 1D Mark III, 1Ds Mark III, 1D Mark IV, 1D X, 5D Mark II, 5D Mark III, 5D Mark IV, 5Ds, 5Ds R, 6D, 7D, 7D Mark II, 30D, 40D, 50D

    NOTE 1: Canon 10D, 20D, 5D Mk I, 1D/1Ds MkI and 1D/1Ds MkII cameras are not supported by the Promote Control HDR mode (with or without CN3 cable). Only a limited subset of basic features such as One-Shot, Time Lapse and Manual Hold are possible on these cameras, and would require a CN3 cable to be connected.

    NOTE 2: Canon 5D Mk III and 6D cannot be automatically switched to Bulb mode if/when required by HDR bracketing (>30 second exposures only). A prompt will be shown on the Promote Control screen if a Bulb mode is required in HDR mode.

    All other cameras mentioned above are fully compatible, including HDR mode.